Good Quality China ASTM A192 Seamless Boiler Steel Pipe

We are going to make every single effort for being excellent , and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Boiler Pipe, Boiler Tube, seamless boiler pipe, Seamless boiler steel pipe

For SA 192  boiler pipe  there are three different types from different area

One is finish rolling : Pipe length usually is 7-9meter and size from 13-26 mm. And usually pipe from Shandong

One is Cold Drawn: Pipe length usually is 10 meter  size from 13-89 mm. And usually pipe from Jiangsu

Other is cold reduce diameter pipe : Usually pipe length is 5-6 meter

 

Standard	Type	Tensile Strength (MPa)	Yield Strength (MPa)	elongation( % )	Harness
ASTM A192 ASMESA192	A192	≥325	≥180	≥35	≤77HRB

 

Standard	Type	Chemical Component%
		C	Si	Mn	P	S	Cr	Mo	Cu	Ni	V>
ASTM A192 ASME SA192	A192	0.06-0.18	≤0.25	0.27-0.63	≤0.035	≤0.035	/	/	/	/	/

 

Grade:

Seamless steel tubes for high / low and medium pressure boilers	10.20 etc.	GB3087	High qualuty carbon structural seamless ateel pipes for manufacturing of different kinds of low and medium pressure boilers.
	SA106B, SA106C	ASME SA106
	SA179/ SA192/ SA210A1, SA210C/ T11, T12, T22, T23, T91, T92	ASME SA179/192/210/213
	P11, P12, P22, P23, P36, P91, P92	ASME SA335
	ST35.8, ST45.8, 15Mo3, 13CrMo44, 10CrMo910	DIN17175
	P195GH, P235GH, P265GH, 16Mo3	EN10216-2
	20G, 20MnG, 25MnG, 15CrMoG, 12Cr1MoVG, 12Cr2MoG	GB5310

Note:Other Size Can Also Be Provided After Consuliting With Customers

 

GB5310-2008 Chemical Component
no	grade	Chemical Component %																Mechanical Property
		C	Si	Mn	Cr	Mo	V	Ti	B	Ni	Alt	Cu	Nb	N	W	P	S	Tensile MPa	Yield MPa	Extend L/T	Impect (J) Vertical/ Horizontal	handness HB
1	20G	0.17- 0.23	0.17- 0.37	0.35- 0.65	≤ 0.25	≤ 0.15	≤ 0.08	—	—	≤ 0.25	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	410- 550	≥ 245	24/22%	40/27	—
2	20MnG	0.17- 0.23	0.17- 0.37	0.70- 1.00	≤ 0.25	≤ 0.15	≤ 0.08	—	—	≤ 0.25	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	415- 560	≥ 240	22/20%	40/27	—
3	25MnG	0.22- 0.27	0.17- 0.37	0.70- 1.00	≤ 0.25	≤ 0.15	≤ 0.08	—	—	≤ 0.25	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	485- 640	≥ 275	20/18%	40/27	—
4	15MoG	0.12- 0.20	0.17- 0.37	0.40- 0.80	≤ 0.30	0.25- 0.35	≤ 0.08	—	—	≤ 0.30	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	450- 600	≥ 270	22/20%	40/27	—
6	12CrMoG	0.08- 0.15	0.17- 0.37	0.40- 0.70	0.40- 0.70	0.40- 0.65	≤ 0.08	—	—	≤ 0.30	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	410- 560	≥ 205	21/19%	40/27	—
7	15CrMoG	0.12- 0.18	0.17- 0.37	0.40- 0.70	0.80- 1.10	0.40- 0.55	≤ 0.08	—	—	≤ 0.30	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	440- 640	≥ 295	21/19%	40/27	—
8	12Cr2MoG	0.08- 0.15	≤ 0.50	0.40- 0.60	2.00- 2.50	0.90- 1.13	≤ 0.08	—	—	≤ 0.30	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	450- 600	≥ 280	22/20%	40/27	—
9	12Cr1MoVG	0.08- 0.15	0.17- 0.37	0.40- 0.70	0.90- 1.20	0.25- 0.35	0.15- 0.30	—	—	≤ 0.30	—	≤ 0.20	—	—	—	≤ 0.025	≤ 0.015	470- 640	≥ 255	21/19%	40/27	—
10	12Cr2MoWVTiB	0.08- 0.15	0.45- 0.75	0.45- 0.65	1.60- 2.10	0.50- 0.65	0.28- 0.42	0.08- 0.18	0.002- 0.008	≤ 0.30	—	≤ 0.20	—	—	0.30- 0.55	≤ 0.025	≤ 0.015	540- 735	≥ 345	18/-%	40/-	—
11	10Cr9Mo1VNbN	0.08- 0.12	0.20- 0.50	0.30- 0.60	8.00- 9.50	0.85- 1.05	0.18- 0.25	≤ 0.01	—	≤ 0.40	≤ 0.020	≤ 0.20	0.06- 0.10	0.030- 0.070	—	≤ 0.020	≤ 0.010	≥ 585	≥ 415	20/16%	40/27	≤ 250
12	10Cr9MoW2VNbBN	0.07- 0.13	≤ 0.50	0.30- 0.60	8.50- 9.50	0.30- 0.60	0.15- 0.25	≤ 0.01	0.0010- 0.0060	≤ 0.40	≤ 0.020	≤ 0.20	0.40- 0.09	0.030- 0.070	1.50- 2.00	≤ 0.020	≤ 0.010	≥ 620	≥ 440	20/16%	40/27	≤ 250

note：Alt is holo-al content 2 grade 08Cr18Ni11NbFG of “FG” is mean fine grain,a. no special request, can not add other chemical compinent b.grade 20G of Alt ≤ 0.015%, no working request, but should be showing on MTC

Standard:

ASTM

Standard2:

ASTM A213-2001, ASTM A213M-2001, ASTM A335-2006, ASTM A672-2006, ASTM

A789-2001, ASTM A789M-2001

Grade Group:

A53-A369

Grade:

A335 P1, A335 P11, A335 P12, A335 P5, A335 P9, A335 P91, A335 P92

Section Shape:

Round

Outer Diameter(Round):

6 - 914mm

Place of Origin:

Hengyang Valin Steel Tube Co.,Ltd

Hubei Xinyegang Steel Co., Ltd

Daye Special Steel Co., Ltd,

Yangzhou Chengde Steel Pipe Co., Ltd.

Baosteel

Application:

Boiler Pipe

Thickness:

1 - 80mm

Surface Treatment:

Oil

Certification:

ISO

CE

IBR

EN10204-2004 type3.2

BV/SGS/TUV inspection report

Technique:

Cold Drawn

hot rolled/rolling

Hot-expanded/expanding

Alloy Or Not:

Alloy

Special Pipe:

boiler tubes

Product name:

A335 P11 Alloy Steel Pipe for boiler

A335 P12 Alloy Steel Pipe for boiler

A335 P5 Alloy Steel Pipe for boiler

A335 P9 Alloy Steel Pipe for boiler

A335 P91 Alloy Steel Pipe for boiler

A335 P92 Alloy Steel Pipe for boiler

Keywords:

A335 P11 Alloy Steel Pipe

A335 P12 Alloy Steel Pipe

A335 P5 Alloy Steel Pipe

A335 P9 Alloy Steel Pipe

A335 P91 Alloy Steel Pipe

A335 P92 Alloy Steel Pipe

Brand Name:

SANON PIPE

BAOSTEEL

TPCO

DAYE PIPES

CHENGDE PIPE

VALIN PIPE

End protector:

Plain

Beveled

Type:

SMLS

Length:

5-12m

MTC:

En10204.3.2B

Heat treatment:

Yes

Secondary Or Not:

new

Non-secondary

Supply Ability

2000 Tons Per Month A335 P11 alloy steel pipe

2000 Tons Per Month A335 P12 alloy steel pipe

2000 Tons Per Month A335 P5 alloy steel pipe

2000 Tons Per Month A335 P9 alloy steel pipe

2000 Tons Per Month A335 P91 alloy steel pipe

2000 Tons Per Month A335 P92 alloy steel pipe

Packaging & Delivery

Packaging Details

A335 p22 Alloy Steel Pipe for boiler packaging:In bundles and in strong wooden box

Port

Shanghai

Tianjin

Lead Time

6-8 weeks

Payment:

LC

TT

D/P

AS DISCUSSED

QUALITY CONTROL

1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking.