Factory Cheap Hot China Carbon Steel Alloy Steel Seamless Tubing A106/A179/A192/A355 P5, P9, P11, P22

All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for Factory Cheap Hot China Carbon Steel Alloy Steel Seamless Tubing A106/A179/A192/A355 P5, P9, P11, P22, Our company eagerly looks forward to establishing long-term and friendly business partner relationships with clients and businessmen from all over the world. All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for China Steel Pipe, Seamless Pipe, We've got established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we have been looking forward to even greater cooperation with overseas customers based on mutual benefits. Make sure you feel free to contact us for more details.

Overview

Application

It is mainly used to make high-quality carbon structural steel, low pressure medium pressure boiler pipe, super heated steam seamless carbon steel pipe

Main Grade

Grade of high-quality carbon structural steel: 10#,20#

 

Chemical Component

Standard	Grade	Chemical Composition(%)
		C	Si	Mn	P	S	Cr	Cu	Ni
GB3087	10	0.07～0.13	0.17～0.37	0.38～0.65	≤0.030	≤0.030	0.3～0.65	≤0.25	≤0.30
	20	0.17～0.23	0.17～0.37	0.38～0.65	≤0.030	≤0.030	0.3～0.65	≤0.25	≤0.30

Mechanical Property

Standard	Steel pipe	Wall thickness	Tensile strength	Yield Strength	Elongation
GB3087		(mm)	(MPa)	(MPa)	%
				≥
	10	/	335～475	195	24
	20	＜15	410～550	245	20
		≥15		225

Tolerance

Permissible deviation of outer diameter of steel tubes

Type of steel tube				Permissible deviation
Hot rolled (extruded, expanded) steel tube				± 1.0% D or ± 0.50, take the greater number
Cold drawn (rolled) steel tube				± 1.0% D or ± 0.30, take the greater number

Permissible deviation of the wall thickness of hot rolled (extrusion, expansion) steel tubes

Unit: mm

Type of steel tube		Outer diameter of steel tube			S / D	Permissible deviation
hot rolled (extruded) steel tube		≤ 102			–	± 12.5 % S or ± 0.40, take the greater number
		> 102			≤ 0.05	± 15% S or ± 0.40, take the greater number
					> 0.05 ~ 0.10	± 12.5% S or ± 0.40, take the greater number
					> 0.10	+ 12.5% S
						- 10% S
hot expand steel tube		+ 15% S

Permissible deviation of the wall thickness of cold drawn (rolled) steel tubes

Unit: mm

Type of steel tube		Wall thickness			Permissible deviation
Cold drawn (rolled) steel tube		≤ 3			15 - 10 % S or ± 0.15, take the greater number
		> 3			+ 12.5% S
					- 10% S

Test Requirement

Flattening test

Steel tubes with an outer diameter greater than 22 mm and up to 400 mm, and wall thickness greater than 10 mm should undergo the flattening test. After the samples are flattened

Bending test

Steel tubes with an outer diameter not greater than 22 mm should undergo the bending test. The bending angle is 90o . The bending radius is 6 times the outer diameter of the steel tube.After bending the sample, no fissures or cracks are permitted to appear on the sample.

Macroscopic examination

For steel tubes directly made by continuously cast billets or steel ingots, the supplying party should guarantee that there are no white spots, impurities, sub-surface air bubbles, skull patches or layering on the cross-sectional acid pickled macroscopic tissue of the billet or steel tube.

Non-destructive inspection

According to the demanding party’s request, which is then negotiated between the supplying and demanding parties and indicated in the agreement, ultrasonic flaw detection may be individually performed for steel tubes. The longitudinal manual defect of the reference sample tube should meet the requirements for post-inspection acceptance grade C8 specified in GB/T 5777-1996.

 

Product Detail

High Pressure Boiler Tube

GB/T5310-2017

ASME SA-106/SA-106M-2015

ASTMA210(A210M)-2012

ASME SA-213/SA-213M

ASTM A335/A335M-2018