European standard EN10216-2 P235GH seamless pipe and where is it used?

What material is P235GH? What material does it correspond to in China?

P235GH is a high-temperature performance Fihekin and alloy steel pipe, which is a German high-temperature structural steel. P235GH, EN10216-2 pressure seamless steel pipe corresponds to the national standard 20G, 20MnG (GB 5310-2008 high-pressure boiler seamless steel pipe).

P235GH alloy steel pipe seamless pipe is generally smelted in electric arc furnace and oxygen top-blown converter. For high requirements, it adopts refining outside the furnace, vacuum induction furnace smelting or double vacuum smelting, electroslag remelting or vacuum treatment, and heat treatment.

P235GH, EN10216-2 pressure seamless steel pipe is suitable for manufacturing pressure vessels and equipment components. Compared with ordinary steel, P235GH alloy steel has higher strength and toughness, cold bending performance and welding performance, chemical properties, biocompatibility, physical properties and process performance.

Mechanical properties of P235GH alloy steel pipe: tensile strength σb350~480 MPa; yield strength σs≥215 MPa; elongation δ5≥ 25%; impact absorption energy Akv≥47 J; Brinell hardness ≤105~140 HB100

Chemical composition (mass fraction, %) of P235GH alloy steel pipe: ≤0.16 Si; 0.60~1.20 Mn; ≤0.025 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; P; ≤0.010 S; ≤0.30, ≤0.020 Al; C; ≤0.35, ≤0.03 Ti.

The following picture is a comparison table of P235GH alloy steel pipe and similar steel grades:

Heat treatment of P235GH seamless steel pipe for pressure: hot working temperature 1100~850 ℃; annealing temperature 890~950 ℃; normalizing temperature 520~580

What domestic material does P235GH alloy steel correspond to?

EN10216-2 P235GH is similar to GB/T5310 20G and 20MnG in my country (as shown in the above picture), and similar steel grades include ASTM/ASME A-1, B; JIS STB 410.